AIRMAN SDG610s的基本原理和工作方式是，通过柴油机驱动发电机旋转产生电能，通过控制系统对发电、负载等进行控制，完成电力供应任务。具体组成部分包括：

1.柴油机：作为发电机的动力源，将化学能转化为机械能，驱动发电机转子转动。AIRMAN SDG610s采用的是日本空气工业（AIRMAN）公司自行研发的发动机，具有动力强劲、噪音低、油耗少等优点。

2.发电机：将柴油机转动的机械能转化为电能并输出，AIRMAN SDG610s采用的是AC同步发电机，能够提供高效稳定的电源输出，并且配备数字式自动电压调节器（D-AVR），可以实现电压和频率的精确控制。

3.控制系统：控制发电机的发电、停机等动作，以及对负载的控制。AIRMAN SDG610s配备了智能故障诊断系统，可随时监控机器状态，及时发现和解决问题，降低维护成本和减少停机时间。

通过上述三个组成部分的协同工作，AIRMAN SDG610s能够稳定、高效、可靠地完成电力供应任务，并且在现场移动方便，适用范围广泛。

保养，和维修注意事项和禁忌

保养注意事项：

定期更换机油、机滤、空滤等。根据机器使用频率和环境条件，一般每100-200小时更换一次机油、机滤，每500小时更换一次空滤。

定期清洗、检查冷却水系统。长期使用会积累一些杂质，导致冷却效果降低，定期清洗可以维护冷却水流通。

定期检查传动系统、液压系统等关键部件，确保运转正常，并及时更换磨损的零件。

定期检查，清洗金属表面及连接部位。机器运转时会产生热量，导致连接部位紧固松动，定期检查并紧固连接部件可以保证机器长时间稳定运行。

维修注意事项：

在维修机器时，必须关闭电源并拆除电缆，避免电击事故。

液压系统和机器上油道、油管均为高压部件，在拆卸和维修时，必须先将系统液压油全部排放完毕，以防止喷出致命的高压液体。

遵循机器使用说明书上的保养和维修提示，避免使用不当而导致机器损坏。

维修时需要使用专业的工具，并且需要根据机器不同部位和类型来选用合适的维修方法，避免损坏机器。

禁忌：

不得擅自修改机器结构或拆除安全装置，以免导致机器不安全或无法正常工作。

不得在不适宜或危险的环境下使用机器，如浸水、不良通风的环境等。

不得超载使用机器，遵循产品说明书上的额定工作范围和工作时长，以避免机器损坏或造成安全事故。

保养和维修机器时，必须使用原厂配件或维修专用的配件，不得使用假冒伪劣配件。

  The basic principle and working610s is to generate electricity through the rotation of the generator driven by a diesel engine, and control the generation and load through the control system to complete the power supply task. The specific components include:

Diesel engine: as the power source of the generator, it converts chemical energy into mechanical energy and drives the rotor of the generator to rotate. AIRMAN SDG610s uses a diesel engine independently developed by AIRMAN Company in Japan, which has the advantages of strong power, low noise, and low fuel consumption.

Generator: converts the mechanical energy generated by the diesel engine into electrical energy and outputs it. AIRMAN SDG610s uses an AC synchronous generator, which can provide efficient and stable power output, and is equipped with a digital automatic voltage regulator (D-AVR), which can achieve precise control of voltage and frequency.

Control system: controls the generator's start-up, shutdown and other actions, as well as the load control. AIRMAN SDG610s is equipped with an intelligent fault diagnosis system, which can monitor the machine status at any time, discover and solve problems in time, and reduce maintenance costs and downtime.

Through the coordinated work of the above three components, AIRMAN SDG610s can complete the power supply task stably, efficiently, and reliably, and is convenient to move on-site, and is widely used.

Maintenance and repair precautions:

Maintenance precautions:

Regularly replace engine oil, oil filter, air filter, etc. Depending on the frequency of machine use and environmental conditions, change engine oil and oil filter every 100-200 hours, and change air filter every 500 hours.

Regularly clean and inspect the cooling water system. Long-term use will accumulate some impurities, which will reduce the cooling effect. Regular cleaning can maintain the circulation3. Regularly check the transmission system, hydraulic system and other key components to ensure normal operation and timely replace worn parts.

Regul